| Machine Dimensions | 600X510X480mm |
| Rack material | 6061 and 6063 Hard aluminum alloy (The unique and dedicated mold extrusion profiles, Let counterfeiters dwarfs.) |
| Engraving area | 400X300mm |
| Z-Axis Stroke | 80mm, Engraving depth depends on the length of the tool edge |
| Acceptable material thickness | ≤100mm |
| Rail type | Chromeplate shaft + Linear Bearings, Surface hardening 61HRC |
| Type of screw | Ball screw 1605, Pitch 4mm |
| Spindle motor | 1.5KW VFD water cooling spindle , 0-24000r/min |
| Collet type | ER11.1 / 8 “(3.175mm) Collet |
| Stepper motor and drive | two-phase hybrid stepping motor 57BYGH56-4011YD, 8 segments drive. |
| Maximum operating speed | 4000mm/min (Engraving speed :300-3000mm/min) |
| Repeat positioning Accuracy | 0.03mm |
| Communication interface |
USB port |
| Software Compatability | Mach3/Emc2/Kcam, (Type3,Wentai, ArtCAM, coppercam) |
| Command code | G code / .nc / .ncc / .tab / .txt |
| Machine weight | 50kg |
|
Rotation Axis (4th Axis) Description: |
Chuck Size: 80mm self-centering chuck Center height: H = 49mm Clamping diameter: 80mm or less Deceleration mode: synchronous wheel / belt Deceleration ratio: 3:1 Stepper motor: 57 type two phase 4 line Positioning accuracy: 0.075 ° |
